https://www.cutoutandkeep.net/projects/sex-and-the-city-half-scoop-gloves • Posted by carlyjcais
So, were you watching the last Sex and the City movie close enough to notice those adorable half-gloves Carrie was wearing while using a pay phone in one scene? Such a subtle difference to the regular wrist-length leather glove...but oh so cute. The gloves were actually from Ines Gloves, available for $147. But we wouldn't think of paying that much for such a simple accessory, now would we? So why buy when you can D.I.Y.?!
So, were you watching the last Sex and the City movie close enough to notice those adorable half-gloves Carrie was wearing while using a pay phone in one scene? Such a subtle difference to the regular wrist-length leather glove...but oh so cute. The gloves were actually from Ines Gloves, available for $147. But we wouldn't think of paying that much for such a simple accessory, now would we? So why buy when you can D.I.Y.?!
Enter a typical pair of wrist-length leather gloves (mine I got at the Buffalo Exchange for $8). Wish that they were gray or brown...but c'est la vie.
By using the photos on the website as reference, I sketched the scoop shape using an eraseable fabric pen onto the gloves. You can see the white lines on the gloves...I tried a couple variations before deciding on the shape. Always make sure your pencil comes off of leather BEFORE you draw all over your gloves!
Add 1/4" seam allowance below the line, and cut with a pair of sharp shears. Behold the scoop shape!
Using Loctite Vinyl, Fabric, and Plastic Glue, turn under that 1/4" seam allowance and secure it to the underside of the glove. ('Tis necessary to glue the seam allowance since leather gloves are usually made from a thin and soft lambskin...which rolls and shifts uncontrollably as you sew it on a home sewing machine...unless you're an all-star with sewing lightweight leathers, I'd recommend gluing it down to get that clean seam first!)
Then, using a leather needle (medium-weight leather, since we're going through two thicknesses + two thicknesses of the lining), edge-stitch about 1/8" from the edge of your gloves to secure that hem. You're done! Step back and admire.
LEATHER-SEWING TIPS: Use a longer stitch than you normally would when it comes to leather...and a good tip when sewing leather is to crank the needle forward manually so that it has pierced the leather completely...BEFORE pressing with the presser foot of the machine to sew your line of stitching. Start sewing with the needle already in the leather to say it another way. Also, you can't go super-fast or super-slow...there's a happy medium where your machine's feed dogs advance the leather at the right speed, the needle punches through the leather without jarring and hitting the needle plate, and the needle goes in vertically and doesn't hit the bobbin case. Too fast and the aforementioned problems will crop up; too slow and the needle won't punch through the leather. It's different for every machine - just something you need to experiment with. (Of course, if you're using a heavy-duty/industrial machine for sewing leather, you can completely ignore what I've just written.:-) When starting your line of sewing, DO NOT BACKSTITCH. Go all the way around the edge, then back into the first ONE or TWO stitches you did at the beginning of the line. Backstitch ONCE. This will create a nice, professional look to your stitching. Also, do not start stitching directly on a seamline. This will usually cause the needle to jar and hit your presser foot/needle plate/bobbin case. Sewing machine needles for leather (for the home sewing machine) are pieces of s$#@. They will snap willfully at ANY irregularity of thicknesses in your material; or bend and not punch the leather vertically at certain speeds...ugh. Buy more needles than you think you need! Can't wait to work these in a new outfit...the leather glove is THE must-have accessory this Fall, so rock it while you can! Happy DIY'ing! xoxo Carly