Satin Flower Wired Tiara

About

You Will Need (6 things)

Steps (7 steps, 60 minutes)

1. 1

   These are the materials you need for this project.

2. 2

   Take a bundle of wires.
   According to the thickness you want in your tiara.
   The length of the wires should be at least 3 inches larger than the circumference of your head.
   Take the bundle of wire and gently twist it .
   Twist all the way from one end to another.

3. 3

   Gather the two ends.
   Remember to measure your tiara if it fits on your head before joining the two ends.
   Take a smaller piece of wire and coil it around the joined area to secure the joint.
   Use a flat nose pliers to smooth out the ends of the small wire.
   If you can't get a perfect round shape put it over something round and fix it.

4. 4

   Make satin flowers.
   You can learn to make these flowers from the link below.
   http://www.cutoutandkeep.net/projects/satin-flowers-2

5. 5

   Cut out a round piece of fabric according to the size of your flower and glue it on the back of the flower.

6. 6

   Measure where you want your flowers to be.
   Use hot glue to stick the flower to the tiara.
   I'm done gluing all the flowers.
   To secure the flowers with the tiara glue another piece of small fabrics on the back.

7. 7

   Make some leaves with tissue fabric. You can use other fabrics but this one fits the crown best.