Ribbon Key Chain Bobble

Fun Easy Keychain

Posted by Katie C.

About

I work at a craft store and I see these things all over the place and I wanted to learn how to make them. There are so many different versions and how you make each one. This is how I decided to make mine.

Share

You Will Need (4 things)

  • 1 Wood Ball
  • 1 Lighter
  • 1 Wire
  • 1 Keyring

Steps (10 steps, 30 minutes)

  1. 1

    Gather Supplies!

  2. 2

    Paint your ball. This is optional.

  3. 3

    Cut your ribbons all about the same size. It can be however long you want. Normally I cut mine at about 6-10 inches.

  4. 4

    Trim and burn your edges. Now this step is up to you. If you have a grosgrain ribbon, it doesn't fray it you cut it at an angle. But if it's a satin ribbon, you need to burn the ends so it doesn't. Just pass your lighter right past the edge. And it melts super fast.

  5. 5

    Arrange your ribbons how you want them to be at the end. Put the thicker ones on the bottom. This way you can see the smaller ones.

  6. 6

    Thread your needle and sew through the ribbons a few times.

  7. 7

    Now add your painted ball.

  8. 8

    Now the keyring

  9. 9

    Sew around the keyring and through the ribbon a few times.

  10. 10

    Tie off the wire on the bottom of the ribbon.