https://www.cutoutandkeep.net/projects/retooling-a-collar-off-an-old-blouse • Posted by Marisa Noelle
Detachable collars - we all love them, right? So awhile back, I found this totally 80s jacket/tunic/blouse thing and kind of fell in love with the collar despite the hideous almost waterproof cross between a choir robe and a slicker type of material. While I will admit that I have indeed worn it before, I really just wanted to save the collar and nothing else so cue up the DIY. This one is so easy my friends (trust me, I am far from a pro), and it doesn't take a neurosurgeon to pull it off, just a pair of scissors and perhaps some needle and thread and pretty ribbon.
Detachable collars - we all love them, right? So awhile back, I found this totally 80s jacket/tunic/blouse thing and kind of fell in love with the collar despite the hideous almost waterproof cross between a choir robe and a slicker type of material. While I will admit that I have indeed worn it before, I really just wanted to save the collar and nothing else so cue up the DIY. This one is so easy my friends (trust me, I am far from a pro), and it doesn't take a neurosurgeon to pull it off, just a pair of scissors and perhaps some needle and thread and pretty ribbon.
1. Lay your blouse with the collar flat, then using the collar seam as your guide, cut about a centimeter below the seam the whole way around the collar. If you want to skip the next step, you can also cut as close to the seam as you are able. You will be left with an unfinished edge which won't be seen when worn, but because I was cutting through 4 layers of material on my blouse (yes 4! Two from the blouse itself and 2 from the collar.), I decided to be cautious and leave myself a little extra room to cut. Either way, I would have had to do step 2 since the 4 layers of fabric would have been stiff enough to stand up leaving a bulky edge where the seam is.
2. With a needle and thread, sew the centimeter of extra fabric down to the collar. This will help it lay more flat. Iron if needed. Because I'm a bit picky...ok, a straight up type A perfectionist at times, I opted to give my collar a faux bow in the front and a hidden hook-and-eye closure to keep it more secure when worn. I have purchased a couple of lovely collars with the typical two ribbons in the front that you tie into a bow, however I have found that on me, the ribbon does not stayed tied or it becomes very cockeyed during the day. So instead, I added a hidden hook-and-eye closure where the collar would close in the front and a bow on the front of the outside flap. This stays in place for me sooooo much better but it does add one more step to the process.
3. In the mirror, put the collar around your neck, overlapping the front ends (about 1/2 an inch in from the edge) and mark off where it will naturally close on both sides. This is where your hook-and-eye closure will go. Grab your needle and stitch on both parts of the hook-and-eye. (The hook will go on the inner side of the outer flap of the collar. The eye will go on the outer side of the flap which lays closest to your skin) Make sense? That's a mouth full!
4. Take your ribbon and tie a bow, making sure it's the right size you want it to be for your collar. With your needle and thread, sew the bow on to the part of the collar which overlaps the other - right on the front center - which is basically on the outer side of where your hook is sewn.
Hooray! You are finished! You now have quite the little show stopper of a collar on your hands.