https://www.cutoutandkeep.net/projects/rectangular-loom • Posted by Silene6
I posted this in my blog a while ago, actually I made the loom a year ago, but I don't now why I didn't uploaded it here... As always, if you don't understand something tell me, I'l try to explain it better.
I posted this in my blog a while ago, actually I made the loom a year ago, but I don't now why I didn't uploaded it here... As always, if you don't understand something tell me, I'l try to explain it better.
We are going to need: one plywood board, a scroll saw, sandpaper, a hammer and some nails.
First draw into the board the shape of the loom. The photo explains it much better than I would. (keep in mind that the measures are in cm)
Mark where the nails should be. In total you should have to put two files of 17 nails each.
Now you just have to cut it. To make the inside hole, make a little one first with a drill. Then sand all the surfaces and finally put a nail in each dot. In other post I'l show you how to knit with it ;)