Pop Can Pendant

---uses the bottom of the can left over by other projects---

https://www.cutoutandkeep.net/projects/pop-can-pendant • Posted by EstherC

A use for the bottom of the can -

You will need

1 small round thing like a Tooth Pick 2 Flat Screw Driver 1 bottom of a Soda Can

Project Budget

Time

Difficulty

Description

A use for the bottom of the can -

Instructions

1. 

   take bottom left over by other crafts leave 1 notch as long as possible, trim down to 1/4 inch rim around the edge of the raised circle.

2. 

   I make large cuts that leave angled points

3. 

   I then smooth those out

4. 

   cut small notches to the raised ring

5. 

   bend back ever other flap

6. 

   use something flat to press the tab back flat

7. 

   Press down each tab into the ring (tucks the sharp edges inside)

8. 

   all tucked in

9. 

   roll the long tab over something round like a toothpick

10. 

    use your flat tool to press the tab down around the tooth pick and tuck the tab in like the others

11. 

    Now you have a pendant to hold your other art

12. 

    Here is an example piece a easy resin.