https://www.cutoutandkeep.net/projects/polymer-clay-daisy-earrings • Posted by The Little Craft House
Join me to make these simple yet stunning Daisy earrings using Polymer Clay! I've chosen to use both Premo and Fimo Polymer clay for this project. This project is nice and simple - but may be a little fiddly!
Join me to make these simple yet stunning Daisy earrings using Polymer Clay! I've chosen to use both Premo and Fimo Polymer clay for this project. This project is nice and simple - but may be a little fiddly!
Start by gathering your supplies. Im using Premo and Fimo polymer clays. Im also going to be using a small (20mm) teardrop shape cutter to form the petals of my daisy.
Condition (soften) your polymer clay and roll out to approximately 3mm thickness.
Using your teardrop shape cutter - cut 10 'petals' from your white clay
Roll 2 even small balls with your orange clay. Squish these gently to form the centre of the flowers.
One-by-one join your petals together by gently pushing the edges together.
You will use 5 petals per flower.
Place your orange piece in the center and apply a small amount of pressure to join it all together.
If you find you have finger prints or lint on your clay (which always happens with white clay!) - you can remove it by using Rubbing Alcohol and a cotton tip.
Cure (bake) in the oven at the clay manufacturers recommended instructions. If you find your clay is still to soft - and not baked properly- you can bake longer but not hotter.
Drill holes in your pieces once finished and attach your findings. And your done! Thanks for joining me for this project! If you enjoyed this - please follow along with my Instagram or YouTube channel @thelittlecrafthouseaus for more inspo and projects!