https://www.cutoutandkeep.net/projects/poketar • Posted by JossieAyame
I loved EyelashWishes's Poketar project, but I noticed that it didn't have a How-To (I think she meant to post it as a project, not a How-To), so I made one for everyone who isn't sure how to make it. =] I made the guitar for a wall decoration using my brother's tiny acoustic guitar from when he was younger. It's basically worthless and he didn't want it anymore so I took it. It's quite difficult to assign a time for this project, because I did it over a period of 3 months, due to the fact that you have to let each thing dry before proceeding, but the amount of time worked on it (excluding waiting) isn't very long.
I loved EyelashWishes's Poketar project, but I noticed that it didn't have a How-To (I think she meant to post it as a project, not a How-To), so I made one for everyone who isn't sure how to make it. =] I made the guitar for a wall decoration using my brother's tiny acoustic guitar from when he was younger. It's basically worthless and he didn't want it anymore so I took it. It's quite difficult to assign a time for this project, because I did it over a period of 3 months, due to the fact that you have to let each thing dry before proceeding, but the amount of time worked on it (excluding waiting) isn't very long.
Get your Pokemon cards and pack them on the top of the guitar to give you a basic idea of how to glue them so they fit nicely.
Remove the strings and clean the guitar with spirits so that the cards can stick everywhere.
Make sure that the orientation of the guitar is right if you want to use it for playing. Mine is glued as if it is a left-handed guitar simply because I think it looks better like that on the wall. Start gluing the cards onto the guitar. I started in a spot where I could easily stick the cards without needing to cut them and knew exactly how they needed to be stuck.
Eventually you'll get to the part where you will have to cut the cards smaller. Apologise to your Pokemon cards and hope they will forgive you for what you are about to do to them.. Place the card in the exact spot where it must be stuck, and fold it along the edge where it must be cut. Then cut along the line so that it fits perfectly and glue it into place. Keep the parts you cut off! You will need some of them
Continue gluing the cards on the top of the guitar. Fill the gaps with the pieces you cut off from other parts.
When you're done it should look something like this.
Now comes the difficult part... Tilt the guitar on it's side, cut the cards to the right side and glue them on.
Get some big books to hold the cards in place so that they do not lift up while drying. This happened a few times with me where the cards curl up. You'll have to do these one at a time, leaving each one to dry completely before sticking the next one.
Leave the guitar overnight to dry completely. Take the dry guitar outside and place it on some newspaper. Use spray varnish to add a glossy finish to the guitar. Put it somewhere out of reach for the time period needed for the varnish to cure (mine was a week).
Restring the guitar if you want and you're done! I didn't restring mine because I just hung it on the wall =]