Piranha Plant Aerrings

Earrings from Mario world :D

Posted by Haruka xz

About

I hope you like this tutorial. It is the first and with this I get the idea that i'm not really good with the english. I have been forgetting but I made all my effort to share this with us! :D

Share

You Will Need (2 things)

  • Wire
  • pale rose ,white, lime green,green and red Sculpey Clay

Steps (19 steps, 120 minutes)

  1. 1

    Do a red ball (2cm diameter)

  2. 2

    Cut a quarter (like a pac man hehe)

  3. 3

    Do this twice.

  4. 4

    Make a little circle for the tongue

  5. 5

    Put it. ((click to see the large pick)

  6. 6

    Cut little pieces to do the fangs. Small and thin.

  7. 7

    Put the fang in the shore and hold it with the same clay, do it with a little knife. Repit 4 times :)

  8. 8

    Make a strip for the lips. Measure, cut and put :D

  9. 9

    Put a wire, this going to hold the ear. Then cover with a white circle

  10. 10

    Put it white spots and a green one down

  11. 11

    For the pipe you will make a little cylinder, smaller than the flower.

  12. 12

    Make a circle with a diameter a little bigger than the cylinder

  13. 13

    Put together and insert this in a large wire.

  14. 14

    With the lime green do a strip. This going to be the stem. Put together with the pipe. Then cut the wire in a considerable extent, you going to grab this in the flower.

  15. 15

    Put it and press. Do the leaves with the same stem. Cut it carefully (the end is near!! :O)

  16. 16

    varnish it and wait to the drying. (you can play videogames :D)

  17. 17

    Bake them just under 110ºC for 15 min aprox. Check them continuosly.

  18. 18

    Cut the wire as comfortable to the ear and...

  19. 19

    ...put the missing accesories (i don't know how to say this in english, in spanish i know them like "mariposas" -butterfly-)

    And TA DA!! :DD