Personalized Party Banner

Make a Personalized Party Banner

https://www.cutoutandkeep.net/projects/personalized-party-banner • Posted by Julie F.

You will need

9 yd roll of the wide Ribbon of your choice 2 colors of Felt to compliment the color of the ribbon (I used a stiffened felt for the back part of the flag, the pink dotted part) Adhesive Felt letters Pin(s) Sewing Machine (unless you can sew by hand or want to use fabric glue) Thread Fabric Glue

Project Budget

Time

Difficulty

Description

Instructions

1. 

   For each letter in the name or saying, you will need to cut a five inch wide triangle from the stiffened felt. Then, mark the center and draw lines to the corners, as illustrated in the picture below.

2. 

   For the front part of the flag, use the contrasting felt and cut 3.5 inch rectangles. Again, mark the middle point and draw lines to the corners, as illustrated in the picture above.

3. 

   Cut out the triangles and use fabric glue to secure the small triangle to the large one...

4. 

   as seen below.

5. 

   Then peel the backs off the felt letters and attach them to the triangles, making sure to keep them level.

6. 

   Find the middle of your ribbon and center your middle letter flag there. Pin. Determine how far apart you would like your flags, I set them two inches apart, and pin each one on.

7. 

   Then attach to the ribbon by sewing or glueing.