Pearl Drop Earrings

Easy to create Pearl Drop Earrings

Posted by Pamela L.

About

Learn how to create these lovely Pearl Drop Earrings in today’s Tutorial Tuesday! They only take about 10 minutes to make and the process is super easy. Depending on the type of materials and the brands you opt to use, these earrings are also very low-cost. I am using Tahitian-coloured Swarovski Pearls and all of my metal is silver-plated, which, at my cost levels, is approximately $0.56 per pair of earrings! Follow along with the tutorial below and you’ll be making these low cost, high impact earrings in no time!

Share

You Will Need (8 things)

  • 1 pair Earwires
  • 1 ½ in Headpins 2
  • 2 ½ mm Cable Chain 1 inch
  • Bead Caps 2
  • 6 mm Pearl Beads 2
  • Flat Nose Pliers
  • Round Nose Pliers
  • Wire Cutters

Steps (3 steps, 15 minutes)

  1. 1

    Using your wire cutters, cut your piece of cable chain in half so you have two ½ inch pieces.

    Place a 6mm Pearl on to a Headpin followed by a Floral Bead Cap. Repeat with the remaining Headpin, Pearl & Floral Bead Cap.

    Using your Round Nose Pliers and Wire Cutters, form a loop with the Headpins above the Floral Bead Caps to create the pearl drops. You can do a simple loop or a wire wrapped loop. The wire wrapped loop is more secure and incorporated the added detail of the spiral wire wrapping.

  2. 2

    Using your Flat Nose Pliers, attach one piece of your Cable Chain to each of the Pearl Drops’ loops. If the chain you are using is ‘finished’ chain, use Jump Rings to make the attachments in steps 4 and 5.

  3. 3

    Using your Flat Nose Pliers, attach the other end of your Cable Chain to each of the earwires.