https://www.cutoutandkeep.net/projects/paper-mache-model-head • Posted by EVEnl
I used a balloon for the head, measuring mine first, I blew it up till it measured actual size. I then took the pot and cut the bottom off and attached the balloon with masking tape to the pot. I Ripped old newspaper into 1inch wide strips, dipped the newspaper into paste and layed it all over the balloon and pot. When it had dried I gave it 2 coats of spray paint.
I used a balloon for the head, measuring mine first, I blew it up till it measured actual size. I then took the pot and cut the bottom off and attached the balloon with masking tape to the pot. I Ripped old newspaper into 1inch wide strips, dipped the newspaper into paste and layed it all over the balloon and pot. When it had dried I gave it 2 coats of spray paint.