https://www.cutoutandkeep.net/projects/outdoor-chair-makeover • Posted by Mark Montano
Turn any thrift store chair into a vision in stripes!
Turn any thrift store chair into a vision in stripes!
Jigsaw 1/4" plywood Sander 2" wide masking tape Hammer & nails Americana Decor Chalky Finish in Carbon, Everlasting, Reminisce & Victorian Americana Decor Light Satin Varnish and Golden Brown Crème Wax
Watch the video tutorial here:
1. & 2. Press butcher paper around the seat to make a pattern and then cut on the creases 3. & 4. Trace the pattern on 1/4" thick plywood, cut out and sand 5. Paint the plywood in Everlasting (white) 6. Starting in the exact center, create stripes with masking tape 7. Paint over the edges of the masking tape with more Everlasting *this technique insures that your stripes are PERFECT 8. Slowly remover the masking tape when the paint is almost dry 9. Paint the chairs (I chose Reminisce and Victorian) 10. Nail the seat to the chairs 11. Seal everything with Americana Decor Light Satin Varnish 12. Paint on and wipe off the Golden Brown Crème was to give an aged and distressed look and then seal with a bit more varnish to help protect from the elements