https://www.cutoutandkeep.net/projects/no-nails-harlequin-table • Posted by Mark Montano
Make a no nails harlequin side table! Perfect for every room in your home.
Make a no nails harlequin side table! Perfect for every room in your home.
E-6000 glue Americana Decor Chalky Finish Paint Small hammer Needle nose pliers Brass thumbtacks Paintbrush Ruler Sandpaper or sanding block WOOD MEASUREMENTS: (1) 1" x 12" x 18" - Table Top (2) 1" x 2" x 14" - Table Skirt (2) 1" x 2" x 9" - Table Skirt (4) 1" x 1" x 24" - Legs (2) 1" x 1" x 5 3/4" - Crossbar Support (1) 1" x 1" x 12 1/4" - Crossbar Support
Evenly glue the two 1"x2"x14" and the two 1"x2"x9" to the underside of the 1"x12x18" table top to create the skirt *Let the glue set for about 15 minutes Next, glue the 1"x1"x24" legs on the inside of each corner of the skirt *Let everything dry for at least one hour
Glue the 1"x1"x5 3/4" pieces in between the legs about 8" up *Let dry for 1 hour Glue the 1"x1"x12 1/4" between the two 5 3/4" pieces *Let everything dry for at least 2 hours With a ruler, create your harlequin (diamond) pattern Paint the diamonds with Americana Decor Chalky Finish Paint
Watch the short video tutorial here:
Paint the legs and skirt of the table and let dry Mark the edge of the table top every inch Holding the thumbtacks with needle nose pliers, tap them into the edge of the table Sand the edges with a sanding block or sand paper to expose the wood on the edges