New To You Coffee Table

re-vamped coffee table

Posted by The AfterCraft

About

Our old coffee table got nibbled on by our dog. I hated it anyways and one day when my boyfriend was clearing out the shed he stumbled across a coffee table.

Now I know what you're thinking.. how do you forget or "stumble" across a whole f**king coffee table? Just remember girls.. we know what our purses are like.. no questions asked eh?

Anyways I immediately remembered this tutorial I had seen in my craftzine mag and got right to work.

The hardest thing in the whole project was deciding what I wanted on the top of the table!!! You'll want to make more once you complete this. One doesn't seem enough and it's super easy.

Share

You Will Need (8 things)

  • Old Coffee Table
  • Poster
  • Paint
  • Spray Adhesive
  • Scissors
  • Sand Paper
  • Glass /Lacquer
  • Cup Of Tea

Steps (14 steps, 120 minutes)

  1. 1

    I took an old table we found in the shed.

    In this case I decided to cut off the legs because it was too tall... or maybe our couch is too low.. Hmmm...

  2. 2

    Make sure if you do this that the bottom is nice and flat or you will have wobbly table madness and tea will be spilt!!!

  3. 3

    Next you want to sand the surface, make sure it's smooth. When you put your poster on top you don't want bumps!! It was cause issues. I worked from a course grit down to a fine grit

  4. 4

    Give it a good wipe after you sand paper with a damp clothing then a dry one. Sawdust in the under paint (in the next step) leave big old nasty bumps..
    We don't want them do we?

  5. 5

    Now I used a outdoor black metal/wood paint.

    You can use a hardy spray paint too. Just make sure it's something that is durable. Tables get knocked, scratched, wiped etc. So you want this work of art to last as long as possible.

  6. 6

    Then put on your second coat for extra protection and coverage.

  7. 7

    Next I took my poster out.

    I measured the top of my table and gave an extra inch on each side.

  8. 8

    And then I cut out the poster

  9. 9

    You can get this stuff at craft stores. I think the carpet stuff might be a bit gooey,
    Just good old Spray Adhesive will do.

  10. 10

    My table had a lip so I taped it off with painters tape so it didn't get all gluey.
    Give it a good even med. spray.

  11. 11

    When you put your poster down, do it with care to try and leave as little bumps as possible.
    Remember you only get it lay it down ONCE. Be careful.
    Smooth out as much as you can with you hands.

  12. 12

    If you still have bumps, grab your iron, put it on dry setting. Put a piece of cotton between the poster and your iron and you can literally just iron out the bumps.

  13. 13

    DECISION!!

    You want to protect your table top. There are a few ways to do this.

    Now you can use a poly resin, or a floor lacquer to seal this bad boy off. This is lengthy and is a little complicated, however the finish is beautiful.
    In my opinion I still think these methods are susceptible to scratches.

    OR in my case we got a piece of glass cut for our table top.
    Simple, cheap and easy.

  14. 14

    Then sit back, amaze yourself on how clever you are, relax and have a cup of tea!!!