Neon Diner Sign
A super simple and fast sign Diner sign for a party!
Posted by Cat Morley
About
Share
You Will Need (7 things)
- Paper for template design
- Double Sided Sticky Tape
- Card
- Scissors
- EL wire
- Awl
- Wire
Steps (14 steps, 60 minutes)
-
1
Print out your design onto a piece of paper.
-
2
Stick the paper to a piece of thick card using double sided sticky tape.
-
3
Cut around the outline of the design.
-
4
Gather your EL wire.
-
5
Use an awl to punch a hole through the bottom right corner.
-
6
Slip the EL wire through the hole from the back.
-
7
Make a second hole on the R where the first line ends and slip the wire back through to the back.
-
8
Bring the wire back through to the front and loop around into the shape of the R.
-
9
Work out the ups and downs and length required for the remaining letters.
-
10
Keep going until you reach the end of your design.
-
11
Make small holes above and below the letters.
-
12
Use a small piece of thin wire to hold the wire in place.
-
13
Test out your light.
-
14
It's ready to use at your party!