https://www.cutoutandkeep.net/projects/mrs-patmores-canisters-diy • Posted by Mark Montano
If you miss the show, why not have a little reminder in your kitchen? Make these Mrs. Patmore canisters with Chalky Finish Paint for Glass so they're dishwasher safe.
If you miss the show, why not have a little reminder in your kitchen? Make these Mrs. Patmore canisters with Chalky Finish Paint for Glass so they're dishwasher safe.
1. Trace the rim of your container on the plywood and cut it out with a jigsaw 2. Sand the edges with a sanding block or a sander 3. Trace a smaller circle (one that fits inside the mouth of the container) This will secure the lid so that it doesn’t slip off. 4. Cut it out and sand it like you did the first lid
5. Using E-6000, glue the smaller circle to the underside of the larger circle 6. Glue the knob to the center of the larger wood circle and let them dry for about an hour before you start painting them 7. Paint them with the Americana Chalky Finish Paint for Glass 8. When dry, tie a 14″ piece of ribbon around the knob.
9. Cut out an oval about 3 1/2″ wide 10. Trace it on some contact paper and cut out 11. Apply it to the container and then fill in with the Americana Chalky Finish Paint for Glass
12. Remove the contact paper and place your accent stencils on each side of the painted oval 13. Fill in with paint and let dry and then remove the stencils 14. Bake the containers at 325? for 30 minutes, let cool and bake again. This will make them dishwasher safe