https://www.cutoutandkeep.net/projects/moroccan-side-tables-diy • Posted by Mark Montano
Just a few pieces of wood make a terrific Moroccan inspired side table! Paint and stencil them any way you want!
Just a few pieces of wood make a terrific Moroccan inspired side table! Paint and stencil them any way you want!
1 piece of 20" x 20" x 3/4" Plywood 4 pieces of 1" x 12" x 22" Pine Board DecoArt Vintage Effect Wash Mandala Stencil Americana Decor Outdoor Living Paint Dritz Brass Nailhead Trim Hammer and Nails Jigsaw and Sander
1. & 2. Fold a sheet of 12" x 22" paper in half and sketch 1/2 of a pointed keyhole design on one side and cut it out 3. Trace it on the 4 pieces of pine board 4. On the 20" x 20" plywood, mark 5" from each corner on each side and connect to marks to make an octagon shape 5. Nail the pine boards together with 2" long nails 6. - 8. Cut out the 4 pointed keyhole shapes and cut off the corners of the 20" x 20" piece of plywood to make the octagon shape and then sand all of the edges 9. Paint the outside of the base and the top of the table top with Vintage Effect Wash in Berry and let dry
10. & 11. Paint the pointed keyhole edge and table top edge with Americana Outdoor Living in Turquoise Sky 12. On the top part of the base (above the tip of the keyhole design) stencil about 1/2 of the mandala on all 4 edges using a cosmetic sponge and more Turquoise Sky 13. & 14. Center and trace a dinner plate in the center the table top and fill in with Americana Decor Outdoor Living in Sunset 15. Stencil the mandala over the orange circle on the table top 16. Paint the inside of the table base with more Outdoor Living in Sunset 17. Apply nailhead trim to the outer edge of each keyhole cut out and around the edge of the table top 18. Center and nail the table top to the base
Watch how to put them together here!