Moroccan Side Tables Diy

About

You Will Need (7 things)

Steps (4 steps, 180 minutes)

1. 1

   1 piece of 20" x 20" x 3/4" Plywood
   4 pieces of 1" x 12" x 22" Pine Board
   DecoArt Vintage Effect Wash
   Mandala Stencil
   Americana Decor Outdoor Living Paint
   Dritz Brass Nailhead Trim
   Hammer and Nails
   Jigsaw and Sander

2. 2

   1. & 2. Fold a sheet of 12" x 22" paper in half and sketch 1/2 of a pointed keyhole design on one side and cut it out
   3. Trace it on the 4 pieces of pine board
   4. On the 20" x 20" plywood, mark 5" from each corner on each side and connect to marks to make an octagon shape
   5. Nail the pine boards together with 2" long nails
   6. - 8. Cut out the 4 pointed keyhole shapes and cut off the corners of the 20" x 20" piece of plywood to make the octagon shape and then sand all of the edges
   9. Paint the outside of the base and the top of the table top with Vintage Effect Wash in Berry
   and let dry

3. 3

   10. & 11. Paint the pointed keyhole edge and table top edge with Americana Outdoor Living in Turquoise Sky
   12. On the top part of the base (above the tip of the keyhole design) stencil about 1/2 of the mandala on all 4 edges using a cosmetic sponge and more Turquoise Sky
   13. & 14. Center and trace a dinner plate in the center the table top and fill in with Americana Decor Outdoor Living in Sunset
   15. Stencil the mandala over the orange circle on the table top
   16. Paint the inside of the table base with more Outdoor Living in Sunset
   17. Apply nailhead trim to the outer edge of each keyhole cut out and around the edge of the table top
   18. Center and nail the table top to the base

4. 4

   Watch how to put them together here!