Cut Out + Keep

Mini Mandala Jewellery Set

This is an easy to make ensemble that will compliment many outfits.

https://www.cutoutandkeep.net/projects/mini-mandala-jewellery-set • Posted by Beads Unlimited

Well, there wasn't much blue sky to be had this Summer, so we decided to make our own little rays of sunshine! These mandalas are addictive to make. Once you start it's very hard to stop.

You will need

Project Budget
Reasonably Priced

Time

0 h 20

Difficulty

Nice & Simple
Medium qc0811pfig7

Description

Well, there wasn't much blue sky to be had this Summer, so we decided to make our own little rays of sunshine! These mandalas are addictive to make. Once you start it's very hard to stop.

Instructions

  1. Small 14998

    NECKLACE To make a mandala, pass 100cm of thread through a 4mm AB bead. Leave a tail of 15cm. Take the thread twice round each side of the bead.

  2. Small 14999

    Pick up a gold rocaille.

  3. Small 15000

    Pass your needle under the threads on one side of the 4mm AB bead. Going in where you came out, thread back through the rocaille. Pull taught. The rocaille should now be sitting on it’s end. Continue adding rocailles in this way until you are back at the beginning. They should fit comfortably around without being crowded. Finish off the row by passing the needle down through the first rocaille and up through the last one you added.

  4. Small 15001

    Use the same method to make the second row with ruby rocailles, catching the thread between the beads on the row below to hold. When the second row is complete, weave the needle down through the rocailles and through the central AB bead. Tie your 2 ends together several times. Weave 1 end and then the other through a few rocailles. Trim off any excess. Make 4 more mandalas in exactly the same way. Then make 5 more but use black rocailles for the central row and ruby rocailles for the outer row.

  5. Small 15002

    BRACELET Make 2 mandalas, in the same way as you did for the necklace, with gold as the central colour and ruby as the outer colour. Then make 2 more with black as the central colour and ruby as the outer colour. The bracelet is assembled in a similar way to the necklace with sections of gold rocailles separating the mandalas and the black rocaille, AB bead and black rocaille sequence. This time use only 10 gold rocailles instead of 20. As before, start with a stop bead. When you have added the last mandala or bead sequence, add just 1 more gold rocaille and make it into a stop bead at the end. Add a calotte to each end over the stop beads. To do this, simply place the stop bead in the centre of the calotte and, using pliers, press shut.

  6. Small 15003

    Add the trigger clasp to 1 calotte by placing the clasp loop onto the calotte hook and pressing it flat. Add a jump ring to the other calotte.

  7. Small 15004

    EARRINGS Make 2 mandalas as before, with gold as the central colour and ruby as the outer colour. Place a dab of superglue onto a flat stud and press a mandala on top. Repeat with the other stud.

  8. Small 15005

    This is how your finished items should look!