Military High Waisted Skirt
Attention for Miss Military!!
Posted by So
About
i´m so in love with the military style and wanted a jersey skirt which has some military attitude, but just found expensive ones. but hey, wherefore i become a tailor?? hooray!!! :)
i think it´s really easy to do this skirt! i recommend to make it with a serger but good old zigzag should probably do it too!!
Share
You Will Need (2 things)
- black and red Jersey
- 6 Button(s)
Steps (13 steps, 120 minutes)
-
1
lay a fitting jersey skirt on some paper and trace around the outlines. make some changes if you like. I made the skirt a bit longer reduced the waist a bit and added two darts for a more snugly fitting.
-
2
draw the dividing seam (where the piping will be) through the dart to the bottom.
-
3
now cut two parts of your whole pattern out of jersey. don´t forget seam allowances (about 5mm, depends on the width of your seam)
-
4
cut the seams you drew on your pattern and cut each part out of jersey (2 times).
-
5
sew the side seams and the darts of the two parts you cut as a whole.
-
6
cut the piping out of red jersey. approximately 2.2cm (depends a bit on your serger seam width and how wide you want the piping). fold in half and iron them.
-
7
pin the piping on middle part from the right side (edges on edges).
lay the side parts on top right sides facing and sew. -
8
sew the side seams and add some buttons beside the piping.
you should have two skirts right now.
-
9
pin the top of the two skirts right sides facing and sew.
-
10
turn out the inner skirt, lay it on the ground and cut about 8cm from the lower edge.
-
11
sew the lower edge of the piece you just cut to the lower edge of the outer skirt (right sides facing).
-
12
sew the upper inner skirt and the lower piece left sides facing.
Iron the upper and lower edge and you´re done!!!
-
13
just one thing by the way: this was the first how-to i didn´t have to look up any vocabulary for!!!! means: my english is way better because of you!!!!! <3