https://www.cutoutandkeep.net/projects/memory-wire-tennis-braclelet • Posted by merjoydesigns
Insert a 6mm Cubic Zirconia into the Square Cup Flat Memory Wire Finding.
The 6mm CZ will fit nicely in the Finding. You can also use Swarovski SS30 Flatback Stones.
Use the side of a Flat Nose Pliers to gently press one of the prongs down onto the stone.
Bend down the prong on the opposite side from the one that you just bent. Bend the remaining two prong to secure the stone in the finding.
Repeat steps 1-4 until all of your stones are set in the findings.
Use the Memory Wire Finishing Pliers to Bend one end of the Flat Memory Wire into a loop.
String each of the Components onto the Flat Memory Wire.
Slide the Components down along the Flat Memory Wire
Continue stringing the Components.
When your bracelet is the desired length, use the Memory Wire Cutters (NEVER a regular cutter) to cut the Memory Wire - leave about 3/8" of Wire from the last Component.
Use the Memory Wire Finishing Pliers to turn a loop to finish the Bracelet.
Find a Video of this Project here: