Make Your Own Necklace Pendant In A Triangle Pattern

About

You Will Need (3 things)

Steps (5 steps, 120 minutes)

1. 1

   Materials and tools:

   1.5mm light orange alum wire

   0.5mm light orange copper wire

   4mm iron bead spacer

   Silvery iron chain

   Jump ring

   Round nose pliers

   Flat nose pliers

   Wire cutters

2. 2

   Step 1: Make the preliminary pattern

   1st, pick a piece of alum wire and fold it in half to find the center position;

   2nd, adjust the fold into 60 degree angle and find the 1/2 point to bend another 60 degree angle;

   3rd, the equilateral triangle is narrowly done; then find the 1/2 point again at the left end;

   4th, make simple coils and cut off extra length;

   5th, bend the right end and do the circle curling with hands;

   6th, cut off excess end and finish the coiling.

3. 3

   Step 2: Finish pattern by coiling

   1st, pick copper wire and do coils around overlapped part at the top to secure the pattern from deforming;

   2nd, do coils around tangent parts as picture shows; and when coiling, add a golden bead to adorn the design.

4. 4

   Step 3: Attach pendant to chain

   Pick a piece of iron chain and attach pendant to the chain at both ends with jump rings.

5. 5

   The final look is as shown below:

   Can you find out more interesting signs in various animation and movies? It is fun to apply these popular patterns into bead and wire jewelry ideas? As you can see, making your own necklace pendant makes for fantastic times!