Magnetic Pen Holder

Make a cute pen holder for your fridge so that you are always ready to add to your shopping list!

https://www.cutoutandkeep.net/projects/magnetic-pen-holder • Posted by Melissa T.

You will need

Materials
1 packets Aeroplane Jelly Crystals Patterned Paper Self Adhesive Magnet Sheet OR Unwanted Promotional Magnet(s) Double Sided Tape
Tools
Pencil Ruler 10 Cutting Knife Scissors

Project Budget

Time

Difficulty

Description

Instructions

1. 

   Remove the jelly crystals from one end of the box. Make it.

2. 

   Slice the tabs off the open end.

3. 

   Measure the height and width of each face. Add 0.5cm to the height of all faces except for the base.

4. 

   Cut out five sheets from the patterned paper corresponding to the measurements from Step 3.

5. 

   Carefully stick the sheets onto all faces using double sided tape.

6. 

   Fold the extras over to cover the raw edges. (Alternatively, you can wrap your box like a present if your paper is thin enough.)

7. 

   Measure the height and width of the face that will be attached to the fridge. Cut out a sheet from the magnet sheet corresponding to these measurements.

8. 

   Peel the backing off the adhesive and adhere it to your box. If you are using a promotional magnet, attach it to your box using double sided tape.