Magazine Covered Tin Cans

simple way to make over an old container

https://www.cutoutandkeep.net/projects/magazine-covered-tin-cans • Posted by Sanjida K.

I used a one inch hole punch to cut out circles from magazines. I used modpodge as I worked and then added one coat afterwards to seal it. I tried to glue it as orderly as I could by gluing on one row/round and then staggering the next row on top.

You will need

Brush Mod Podge Hole Punch Magazine(s) Container

Project Budget

Time

Difficulty

Description

I used a one inch hole punch to cut out circles from magazines. I used modpodge as I worked and then added one coat afterwards to seal it. I tried to glue it as orderly as I could by gluing on one row/round and then staggering the next row on top.

Instructions