Little Mermaid Apron: From Concept To Creation

be super cute while making something super tastey

Posted by Natalie

About

So I saw these super cute 50s style aprons and I really wanted to make one and then I was like you should make it a Disney apron. And this the result of countless hours pattern making and sewing. If you have any questions on how I did something, feel free to ask in the comments. I hope you like and try to make your own princess apron.

Share

You Will Need (1 thing)

  • Fabric

Steps (11 steps, 1200 minutes)

  1. 1

    First you'll want to sketch out your idea, take measurements (waist, upper and lower bust), and pick some fabric. For the wrap around straps I suggest adding 2-3 more feet than you need. This should give you adequate amount of space to tie a bow in the back.

  2. 2

    Next make the patter. This is probably the most difficult step. If you've never made a patter before I would consult some other sewing blogs first. Make sure to leave some space for seam allowance (I used about 3/4 in except for the top of the skirt (where it connects to the chest piece) you'll want to give more seam allowance here)

  3. 3

    Cut out the fabric form the pattern. I used leftover fabric form other projects. The red and solid green are knit and the fish scale pattern is a plastic based fabric. I also found some purple shear to add to the bottom and over the bodice. You'll also need interface for the straps.

  4. 4

    I started with the top straps. Pin the interfacing to the other sides of straps. It should be fabric, fabric (good sides facing each other), interfacing. Straight stitch the side then cut triangles around the stitch line. Be carful not to get too close or cut the stitches.

  5. 5

    Turn the straps inside out, iron the straps and sew a straight stitch around the edge. This will keep it from losing the shape and create a stiff bow when tied. Do the same thing with the waist straps.

  6. 6

    The skirt is simpler. First you'll want to finish the sides of the solid green fabric. Pin and sew a straight stitch.

  7. 7

    sew across the top (where it connects to the bodice) and sew a straight stitch (make sure that the machine is set for the longest and loosest stitches because you are going to gather. Tie one end of the stitch off, and pull the other. slide the wrinkles that are created so they are evenly dispersed on the skirt.

  8. 8

    Take one side of the two chest pieces you cut. Pin the shear to one purple chest piece. Use a zigzag stitch to attach.

  9. 9

    Place the shear front then the top straps (where you want them to be) and the other purple chest piece together. All the good sides should be facing each other with the bad side facing out. Pin and sew with a straight stitch. Cut triangles around the stitch line (don't cut into the stitch) and then turn inside out. If the bodice is to large, you can fold the sides together from the tip of the breast to the armpit (similar to how bras are sewn) and straight stitch.

  10. 10

    Cut a large piece of shear (it should be a little longer that the solid green piece). Fold it together and sew the sides (straight) together. Turn it inside out and pin it to the chest, skirt, and waist strap. Make sure that everything is lined up and securely pined. Zigzag stitch everything together.

  11. 11

    Tada! You're done. Enjoy the new super cute outfit.