Lion And Unicorn Bag

A bag fit for a King

https://www.cutoutandkeep.net/projects/lion-and-unicorn-bag • Posted by Natalie S.

My favourite project. I must admit, it's not my original idea, I actually took the design from a bag I saw by Kate Garey and loved. Here is the link: http://www.kategarey.com/page3.htm

You will need

¼ yd Felt or less ½ yd Fabric for the ouside of the bag ½ yd Fabric for the lining (I used corduroy as usual) ½ yd fusible Interfacing I interfaced all material (except for the handles) In this project. You'll probably use much less than half a yard tho. Thread

Project Budget

Time

Difficulty

Description

My favourite project. I must admit, it's not my original idea, I actually took the design from a bag I saw by Kate Garey and loved. Here is the link: http://www.kategarey.com/page3.htm

Instructions

1. Cut a semi circle template according to how big you want your bag. Then cut 2 from your lining material and two from your outside material.

2. Cut out your felt shapes and embroider till you feel good. It took me alot of embroidery.

3. Sew the shapes onto one of your outside pieces.

4. Interface all pieces

5. Put the outside pieces (Right Sides together) and sew around sides and bottom. Do the same for the lining pieces

6. I forgot to tell you to make the handle for your bag...I wanted mine nice and long so I cut 2 47" long rectangles (& about 3" wide) then I put them right sides together and sewed all the way round but LEAVING A GAP then I turned it right side out via the gap. I then topstitched all the way round the edge and added ribbon for decoration

7. Now...put the lining 'bag' inside the outer 'bag' so that the wrong sides are together. form seams around the rim so that it's all nice, neat and good. Attach the handles sandwiched in between the outside material and the lining material. Pin everything in place and sew all the way round the rim. I think that's everything.