Leopard Print Glitter Glass

Decorate some Mod Podge Leopard Print Glitter Glass

Posted by Emily B.

About

Ok, so full disclosure. I love leopard print!!! I first started making glitter glasses when they seemed to be all the rage about 5 years ago. Now I want to add a couple of layers to this with an ombre effect and a fabulous animal print. It’s a very easy craft using just a few key things. The actual steps themselves don’t take long at all but you will need to allow a few hours drying time between each one.

Share

You Will Need (5 things)

  • A Glass or cup
  • Mod Podge (water based sealer, glue and finish)
  • Paint Brush or paint sponge
  • Glitter (2 colours if doing ombre effect)
  • Fine point sharpie ( Marker Pen )

Steps (5 steps, 30 minutes)

  1. 1

    Cover the top half of the glass in mod podge, leaving a half centimeter gap at the top . After all is covered in glue, coat in glitter (be generous!). Allow at least 2 hours to dry.

    Repeat this step to achieve a brighter colour. I used white glitter first, then silver as the mix really makes the colour pop. Allow to dry.

  2. 2

    Cover the bottom half of the glass in mod podge then drag the glue up to approximately 2/3 of the glass in a random stripe pattern.

    Cover with contrasting glitter (I used gold).

    Repeat this step twice and allow to dry.

  3. 3

    Once completely dry, cover the whole glass in mod podge and allow to dry for 3-4 hours.

  4. 4

    Using a sharpie marker pen, draw your pattern or print all over the glass.

    Wait 30 minutes then coat in another layer of mod podge.

  5. 5

    Allow to dry for 3-4 hours. Your glass is now complete and ready to use!