Cut Out + Keep

Large Loops Copper Bracelet

Link hammered rings together with knurled chain links to create an open, airy bracelet.

https://www.cutoutandkeep.net/projects/large-loops-copper-bracelet • Posted by Alison M. [Ornamentea.com]

You can create these jump rings by opening links of the medium knurled antique copper chain, this project uses approximately 11 inches of chain to create 28 jump rings All supplies and tools are for sale at Ornamentea.com

You will need

Project Budget
Reasonably Priced

Time

0 h 40

Difficulty

So-so
Medium screen shot 2009 11 06 at 12.54.15 1257512071

Description

You can create these jump rings by opening links of the medium knurled antique copper chain, this project uses approximately 11 inches of chain to create 28 jump rings All supplies and tools are for sale at Ornamentea.com

Instructions

  1. Small screen shot 2009 11 06 at 12.56.13 1257512196

    To turn the chain into jump rings use your chain nose pliers to gently open each chain link and remove it from the chain. Continue until you have created 28 jump rings.

  2. Small screen shot 2009 11 06 at 12.56.47 1257512237

    With your chain nose pliers open the square jump ring and thread it through the lobster claw and one hammered ring. Close jump ring securely.

  3. Small screen shot 2009 11 06 at 12.56.55 1257512241

    With your chain nose pliers loop one knurled jump ring around two hammered rings. Close securely. Repeat until you have 7 knurled jump rings closed around the two hammered rings. Repeat to attach all hammered rings. Close bracelet by hooking lobster claw around one hammered ring as shown.