Cut Out + Keep

Just My Type Pillow

Make a totally cool fabric spray type pillow in just a few simple steps

https://www.cutoutandkeep.net/projects/just-my-type-pillow-2 • Posted by swelldesigner

Diecuts make great stencils to play with on a variety of different surfaces. I decided to use my type diecut with my favorite fabric sprays and canvas fabric for a totally bright and grungy looking pillow that makes a statement! Before you begin: Wash fabric to remove sizing. Also, prepare your work area for spraying. Use a large table or outdoor area.

You will need

Project Budget
Reasonably Priced

Time

1 h 30

Difficulty

Nice & Simple
Medium dsc 0452

Description

Diecuts make great stencils to play with on a variety of different surfaces. I decided to use my type diecut with my favorite fabric sprays and canvas fabric for a totally bright and grungy looking pillow that makes a statement! Before you begin: Wash fabric to remove sizing. Also, prepare your work area for spraying. Use a large table or outdoor area.

Instructions

  1. Small dsc 0441

    Using fabric marking pencil, trace around 12x12 piece of paper. Move paper over and repeat.

  2. Small dsc 0445

    Cut around traced lines with scissors.

  3. Small dsc 0452 1

    Lay diecut on top of fabric.

  4. Small dsc 0456

    Using Fabric Spray Paints, spritz and spray over top of diecut as desired. The more you spray, the darker the areas will become. Pressing pump halfway will produce a splatter effect. A full pump produces a spray mist. Remove diecut and spray even more color in areas you desire (shown).

  5. Small dsc 0463

    Your finished design will look something like this. Spray on fabric as desired. For best results, let fabric sit for 72 hours before you wash it. I personally didn't do this (I washed mine after 4 hours) and the colors still came out vibrant.

  6. Small dsc 0464

    Iron both pieces of fabric Next, flip the two pieces inside out and pin together around edges.

  7. Small dsc 0468

    Sew around edge of pillow. I used a zigzag stitch, but it may have been better to do a straight stitch.

  8. Small dsc 0470

    Leave an opening of about 2 inches. Now turn the pillow right side out.

  9. Small dsc 0472

    Stuff the pillow using fiber fill and shape as you go.

  10. Small dsc 0477

    Using needle and thread sew up opening and you are finished!

  11. Small dsc 0470 1

    Here's the other side of the pillow. It has a more concentrated spray look. Also I laid the diecut down again and sprayed and it created a slightly offset registration look (think when you read the comics and the printed colors don't quite line up). I like both sides for different reasons. That's the fun of the sprays...they are definitely fun to play and experiment with!!