https://www.cutoutandkeep.net/projects/instructions-on-how-to-make-bracelets-out-of-only-a-few-swarovski-crystal-beads • Posted by
Have you tired of the dazzling products that comprised of complicated beading patterns, or you are only a beginner for handcraft? Here, some useful notes express the instructions on how to make bracelets with an innovative and stylish type. In this article, it is mainly about certain instructions for making bracelets with Swarovski Crystal Beads and tiger tail. Now, let’s just start.
Have you tired of the dazzling products that comprised of complicated beading patterns, or you are only a beginner for handcraft? Here, some useful notes express the instructions on how to make bracelets with an innovative and stylish type. In this article, it is mainly about certain instructions for making bracelets with Swarovski Crystal Beads and tiger tail. Now, let’s just start.
Main beading methods for principal adornment of the bracelet Part1: cut a 20cm long tiger tail wire, then string 6 light blue 8/0 Glass Seed Beads and make a loop by crossing wire through the last one piece; Part2: add three Swarovski Crystal Beads onto the left wire tip (light rose one in the middle); next, lead the right tip through the adjoining 8/0 Glass Seed Bead; Part3: minus one Crystal Silver Shadow Color Swarovski Crystal Bead onto the left wire tip and keep the right tip bead as same as part2; Part4: in the last, add one light Rose Swarovski Crystal Bead and tie a knot at end.
Repeat the above step three times To make a bracelet according to the instructions for making bracelets show, you should repeat the step1 three times for three flower branches.
Make a bracelet Cut another four 15cm bundles tiger tail wire. In the next, thread four of them together through one Iron Bead Tip, at the same time, string one Crimp Bead and close the iron bead tip after squeeze the Crimp Bead. Then, divide the wire into two groups of two and string the flower parts onto the wire. At last, add another Iron Bead Tip and attach the Brass End Piece to it.
Tips & Warnings in Instructions on how to make bracelets: 1. Before adding the ending iron bead tip, make sure you have adjust the three flower parts in their positions; 2. When feed four bundles tiger tail together into the iron bead tip, it maybe a little troublesome. Thus, you can use the wire-cutter plier to flat them at beginning.