Hotel Inspired Pillow Shams

No-sew

https://www.cutoutandkeep.net/projects/hotel-inspired-pillow-shams • Posted by uptodateinteriors

Create these easy no-sew hotel inspired pillow shams with iron on fusible webbing and ribbon!

You will need

Ironing Board Iron Fusible Webbing Towel Ribbon Measureing Tape Fabric Scissors Glue 2 Pillow Case

Project Budget

Time

Difficulty

Description

Create these easy no-sew hotel inspired pillow shams with iron on fusible webbing and ribbon!

Instructions

1. 

   Wash and iron pillow shams. Measure the width of your sham from seam to seam and take away two inches. Cut four pieces of ribbon and webbing. Measure the height of your sham the same way and cut four pieces of ribbon and webbing.

2. 

   Add a little glue to the edges of the ribbon to keep it from unraveling. (I used Elmer’s glue.) You can drape the ribbon across your ironing board so the ends of the ribbon don’t touch anything while the glue dries.

3. 

   Place the webbing on the sham two inches from the top with one inch on each side. Use the steam from the iron to melt the webbing in place a little. Lay the ribbon on top, place a cloth over it, and iron.

4. 

   Do the opposite side of the pillow sham the same way and then the sides. This will keep the ribbon overlapping the same way.

5. 

   Do a happy dance because the first one turned out so awesome!!! The second one will be even easier. :)