https://www.cutoutandkeep.net/projects/hello-kitty-panda-phone-bling-2 • Posted by BB Kitty
Ok.... This project took me 12 hrs to apply rhinestones and 24 hrs to let dry. I know this is a long time but well worth it in the end. :) First I printed out a picture I really liked and downsized it to fit my phone. I taped it on the inside so I could use it as a pattern. I used small rhinestones to outline the Panda Kitty and then filled it in with the bigger ones. After I did the Kitty then I did the outside of it. For this projedt I used 3mm and 1.5mm stones in lt. purple, pink, lt. green, Dr. green Marquis shaped, black, clear and pearl. I also added a heart and a 3D rose. If you are putting on the stones and there are gaps don't worry. You can use small stones and the G-S Hypo Cement to fill in, so u won't see your phone threw the gaps. I allowed the stones to dry for 24hr before applying the sealer then let dry another 24hrs.
Ok.... This project took me 12 hrs to apply rhinestones and 24 hrs to let dry. I know this is a long time but well worth it in the end. :) First I printed out a picture I really liked and downsized it to fit my phone. I taped it on the inside so I could use it as a pattern. I used small rhinestones to outline the Panda Kitty and then filled it in with the bigger ones. After I did the Kitty then I did the outside of it. For this projedt I used 3mm and 1.5mm stones in lt. purple, pink, lt. green, Dr. green Marquis shaped, black, clear and pearl. I also added a heart and a 3D rose. If you are putting on the stones and there are gaps don't worry. You can use small stones and the G-S Hypo Cement to fill in, so u won't see your phone threw the gaps. I allowed the stones to dry for 24hr before applying the sealer then let dry another 24hrs.