https://www.cutoutandkeep.net/projects/hairclip-bows • Posted by Lauren R.
Okay, first take your ribbon (it can be a strip of fabric too!), and glue where the dot in pic is.
Now, fold one halve on to the glue.
Do the same on the other side...
Now, it should look like this!
Now, at this part you have two choices! you can either take a botton or righnstone or jewel etc. Or you can take the sam eribbon and wrap it arround.
If you want to do the one with the button, then this is how! First thread your button with embroidery floss (you can use thead too).
Now take the theaded botton and put the botton in the front of your bow, and tie the thread ing the back of the bow. so when you are done it should look like this!
Next, Glue it to a hair clip and... YEAH!!! ITS DONE!
Okay, now here's how to do the other one. One you've made that part of the bow, take a piece of the same ribbon/fabric that is the same length but skinnier.
Now, wrap it arround the middle of you unfineshed bow and gue it in the back so it will stay. WHen you are done it should look like this!
Now all you need to do is glue it to a hair clip!