Gossip With Me Headband
Follow these steps
Posted by Jenna C.
About
Styling Tips:
1. This headband is absolutely adorable with a preppy blazer, jeans and boots!
Share
You Will Need (5 things)
- 1 yd Pleated Satin Ribbon - Red
- 1 Seaside Club Crest Appliqué
- Stretch Ribbon (or a hair tie will work)
- Scrap Fabric (any kind)
- Glue Gun
Steps (12 steps, 50 minutes)
-
1
Gather Materials and plug in your glue gun.
-
2
Measure pleated ribbon around your head and cut accordingly.
-
3
Flip over the crest applique so that it is face down. The side that is pointing up should be shiny!
-
4
Glue one side of ribbon onto the back of applique as shown. Make sure that the shiny part of the ribbon will face out.
-
5
Glue down the other end of your ribbon piece as shown.
-
6
Cut a piece of fabric that will cover the ribbon on back of the applique
-
7
Glue the fabric piece onto the applique.
-
8
Cut the corners of the fabric so it doesn't show through the other side.
-
9
The headband won't fit you yet, but no worries...we're almost there! Make a cut in the ribbon as shown. We cut the area that will go under our hair, this way the stretch piece is hidden.
-
10
Either cut a 2" piece of stretch ribbon (we did) or use a hair tie for this step. Glue or stitch the elastic or stretch ribbon onto the ends of the red pleated ribbon.
-
11
And Voila!! DIY Chic!
-
12
Rock it!