Gold Stud Bow Tee

Follow these steps

Posted by Jenna C.

Styling Tips:
1. You can create any design with these studs!! Make your own graphic stud tee design, print it and stud around it!

1

Gather materials.
2

You'll need to print a photo of a big bow. Here is the one we printed!
3

Tape the printed out bow to your tee.
4

Pick an area to begin. Push the first stud through the front of the tee. Turn the tee inside out and fasten prongs. You can easily do this with your fingers/nails. They are not super tough studs.
5

Start studding around the bow. Here are some pictures to guide you through our bow project...
6

Keep goin...it takes a while...but it's SO worth it :)
7

Be sure to stud around the paper, not ON the paper.
8

Stud stud stud...
9

Here is a close up. We're getting towards the end, but we want to make sure that the studs fit in just right.
10

Here is a look at the inside of our tee.
11

Now that the outside of the bow is finished, we're going to give our hands a rest. Okay that's good...back to work!
12

Now, peel off your printed out bow.
13

Almost done! Here is the border of the bow. Lookin good!
14

Now we lay out the studs for the middle section, just to make sure they fit right.
15

After approving your layout, secure studs on the tee. Here is side #1.
16

Et Voila!! So chic, so easy! To D.I.Y. for...