Glitter Heart Knobs And Rings

Resin Heart Knobs and Rings

Posted by Mark Montano

About

Make dazzling jewelry and drawer knobs with this simple tutorial using Glaze Coat from Famowood!

Share

You Will Need (8 things)

  • Latex Gloves
  • Plastic cups
  • Craft Knife
  • Cardboard
  • Buttons
  • Glitter
  • Silicone Mold
  • Famowood Glaze Coat

Steps (4 steps, 120 minutes)

  1. 1

    Here's a picture of what you'll need

  2. 2

    Cut your cardboard in squares
    Cut out section of the cardboard so you can slip on the hose clamp just under the screw
    *Make sure it's secure
    Cut small holes in the center of the cardboard squares for the screws

  3. 3

    Mix equal parts of the Glaze Coat for 5 minutes
    Pour 1/4" in each mold

  4. 4

    Fill with your glitter, buttons and confetti
    Pour the Glaze Coat almost to the top of the mold, but not quite
    If you notice bubbles, blow on top of the filled hearts until they pop
    Carefully position the head of the screw inside a Glaze Coat filled heart
    Position the screw part of the hose clamp inside the heart
    Make sure the cardboard does not touch the Glaze Coat
    Let dry overnight OUTSIDE under a cardboard box or in part of the house you're not occupying