Flower Tacks
"Tack"tical
Posted by Creative Origins
About
I previously posted this tutorial, and then removed it because I found a better, easier way to make them. So, here is the revised project.
Share
You Will Need (5 things)
- Foil wrapped Cardboard
- Aluminum soda Can
- Long shank thumbtack Push Pins
- Pony Beads
- Oven set at 400*F
Steps (6 steps, 30 minutes)
-
1
Cut the aluminum can so that you have the bottom third, then cut sides and roll to form flower like base.
-
2
Place first bead onto shank of thumbtack.
-
3
Then push tack through the center of your base.
-
4
Now arrange six more beads around the center.
-
5
Put the whole thing in the oven for 10 minutes. Remove from oven and push thumbtack down until even with base. Then, back in the oven for another 10 minutes, or until holes in beads have disappeared.
-
6
Allow your creation to cool and then pop off the base.