Cut Out + Keep

Floral Print Oxford Shoes

Work on every type of shoes, not only for oxfords!

https://www.cutoutandkeep.net/projects/floral-print-oxford-shoes • Posted by Yasmine B.

*ATTENTION: USE ONLY LASER PRINTED PATTERN, OTHERWISE INK WILL FADE AWAY*

You will need

Project Budget
Almost Nothing

Time

1 h 00

Difficulty

Pretty Easy
Medium img 7411 Medium img 7390vvv

Description

*ATTENTION: USE ONLY LASER PRINTED PATTERN, OTHERWISE INK WILL FADE AWAY*

Instructions

  1. Small img 7366

    Clean your shoes

  2. Small img 7368

    Print your pattern (mine is available here in this project)

  3. Small img 7367

    Turn the sheet and draw the shape you need, then cut it. You don't have to be very accurate, you can always cut it.

  4. Small img 7382

    Once cut the piece, cut it again in half (so it would be easier to glue). Then turn the sheet to make the pieces for the other sides of the shoes.

  5. Small img 7370

    With a brush take the Mod Podge/Vinyl Glue and paint the shoes and attached the sheet

  6. Small img 7374

    Cover again the sheet attached on the shoes with Mod Podge/Vinyl Glue

  7. Repeat those steps until you finish your shoes. Wait 24 hours, then spraypaint with transparent paint. Wait 5 minutes. You're done!