Cut Out + Keep

Flip Flop Air Freshener

Flip Flop Air Freshener

https://www.cutoutandkeep.net/projects/flip-flop-air-freshener • Posted by Heatherr M'Kay

It is quite fiddle but I found it fun. so Yeah. It has to be shapie because other permanent markers rub off.

You will need

Project Budget
Reasonably Priced

Time

0 h 30

Difficulty

Tricky
Medium image007 1220033610 Medium image008 1220034201 Medium image009 1220033626

Description

It is quite fiddle but I found it fun. so Yeah. It has to be shapie because other permanent markers rub off.

Instructions

  1. Small 13729

    Make a template. Draw the flip flop sole on paper, cut it out and draw around it onto clear plastic

  2. Small 13730

    Colour both sides in with sharpie.

  3. Small 13731

    Make 2

  4. Small 13732

    Make the Y bar of the flip flop. It has to be slightly longer. Colour both sides in with sharpie

  5. Now this is the tricky bit. Make 3 slots in one of the flip flop soles for the Y bar to go in using a Stanly knife. Be carefull! Don't cut yourself as I did lol.

  6. Small 13734

    Thread it in. Fold the ends over and sellotape them.

  7. Small 13736

    It should look a bit like this. Glue the other flip flop on. Make a hole in the bottom and thread elastic through and tie.

  8. Small 13737

    Spray it with perfume, Hang up and ENJOY!!! The sharpie will run if you put too much spray on. I suggest holding the elastic and blowing it hard.