Filigree Butterfly

Make a filigree butterfly necklace.

https://www.cutoutandkeep.net/projects/filigree-butterfly • Posted by Alison M. [Ornamentea.com]

You will need

2 antique brass sixteen daisy plate Filigree , 36 x 36 mm 1 naked brass Filigree butterfly 13 in of antique brass sparkle Chain , 2 x 1.5 mm 7 links of antique brass medium knurled oval Chain , 8 x 5 mm 36 in Satin gold .012 Beadalon Beading Wire 3 assorted Plastic Flowers 3 assorted fire polished Glass Beads , 6-8 mm 13 satin blue faceted Glass Beads , 3 x 6 mm, rosary looped with 20 gauge wire Wire Cutters Round Nose Pliers Flat Nose Pliers Chain Nose Pliers

Project Budget

Time

Difficulty

Description

Instructions

1. 

   Using your flat nose pliers bend the naked brass butterfly wings upward as shown. Thread an 8 inch section of the beading wire through the butterfly and use the beading wire to stitch the faceted beads onto the body of the butterfly as shown. Knot the end securely and trim the knot.

2. 

   Set aside the beaded butterfly.

3. 

   Using a 10 inch section of the beading wire stitch the plastic flowers and fire polished glass beads to one corner of the daisy plate filigree as shown.

4. 

   Knot securely. Position the beaded but- terfly on the opposite corner of the daisy plate.

5. 

   Using an 8 inch section of the beading wire, stitch the butterfly to the daisy plate as shown. Trim all knots.

6. 

   Turn your work face down so you can see all the knots on the back. Place the second daisy plate over the back to cover the knots and stitching. Using the remaining beading wire, stitch around the edge of both plates to secure them to one another as shown. Trim the knot.

7. 

   Using your chain and flat nose pliers, assemble the bead chain as shown.