Felt Rose Ring
simple and delicate~
Posted by angelichigo
About
My first time doing a rose out of felt. It was quite easy to do so I would like to share the tutorial with everyone. You can actually make these roses into brooches or earrings. Very versatile and cute.
by angelichigo.
Share
You Will Need (6 things)
- Needle
- Felt
- Metal Ring
- Thread
- Glue
- Scissors
Steps (16 steps, 1800 minutes)
-
1
You will need:
-Felt or other fabric (I chose indigo blue)
-Scissors
-Ring band
-Needle
-Matching colour thread -
2
Cut out as much pedals as you wish.
I used 11 pedals. You can cut more to make your rose to have more volume.
My pedal size is within 1 inch x 1 inch. -
3
Take a pedal and put a string at the tip of the pedal (the side that is narrower) as show in the picture
-
4
Pull the string tight so that you create a shape like this. Tie a knot to keep the shape. Repeat these steps for the rest of the pedals
-
5
You should have something like this.
-
6
Take four of them and sew them together.
Tips: One pedal should overlap the other (like a fan)
-
7
You should have something like this after sewing the 4.
-
8
Repeat another set of 4 and a set of 2. Keeping one pedal remaining.
-
9
Now, stack the 3 sets together and sew. You should have 2 sets of four's and 1 set of two's. Make sure the set of two's is at the top.
Tips: Distribute the pedals evenly
-
10
Now mold the two pedals in the center and squeeze a bit inwards and secure with thread.
-
11
Use the remaining pedal and roll the tip to something like this and secure with thread. This will be used as the center pedal.
-
12
Fit the pedal into the center and sew in place.
Tips: you might need to trim the center pedal a bit if it appears to be taller than the rest of the pedals.
-
13
Cut out the same size circle as the ring blank from the felt.
-
14
Sew the circle to the bottom of the rose.
-
15
You should have something like this. Now glue the circle onto the ring band circle area.
-
16
Ta la~ You're done!