https://www.cutoutandkeep.net/projects/fauxfaux-chanel • Posted by Karson
This is why there is DIY! When you can't afford the real thing...fake it! You Will Need section is not listing all the supplies: Polymer Clay Printer Scissors Xacto Knife Oven Jump Ring Necklace Chain Pyramid Studs (optional)
This is why there is DIY! When you can't afford the real thing...fake it! You Will Need section is not listing all the supplies: Polymer Clay Printer Scissors Xacto Knife Oven Jump Ring Necklace Chain Pyramid Studs (optional)
First print out the image from your computer You could also find a pic in a magazine Cut out the image
Roll out your polymer clay flat about 1/4 inch thick Place the cut out image on top of your flattened clay Using the paper image as a stencil, carefully cut it out of the clay with the xacto knife Remove the paper stencil and smooth out any rough edges Make a small hole at the top for the jump ring to go through
Bake for about 30 minutes After it has cooled off, apply about 3 layers of the clear glossy varnish to the front and sides After the varnish dries, add the jump ring and necklace chain If you want, glue on some pyramid studs to fancy it up