https://www.cutoutandkeep.net/projects/fabric-gift-party-or-loot-bags • Posted by Susan T.
These were a first attempt at making party (loot) bags for my daughters Birthday. I'm a sewing beginner so they're probably not technically right but they work :-) This is all pretty basic, but I could have used with instructions myself so I hope they help someone else. I used a cheap polycotton material and 1 inch wide ribbon.
These were a first attempt at making party (loot) bags for my daughters Birthday. I'm a sewing beginner so they're probably not technically right but they work :-) This is all pretty basic, but I could have used with instructions myself so I hope they help someone else. I used a cheap polycotton material and 1 inch wide ribbon.
Cut two pieces of fabric to a little more than the size you need the finished bag to be. Out of laziness I cut the fabric as one long strip to fold in half so I didn't need to sew the bottom edge. This strip is about 60cm x 23cm and the finished bag is about 26cm x 20cm.
Iron the top edges of the pieces over to the inside to make a hem. I turned over by 1cm then by another 2cm or so and pressed.
Stitch a piece of ribbon onto the right side of one of the pieces, quite near the top. I used 40cm of ribbon but you would need a longer piece if you wanted to tie a proper bow. I stitched it in two places with a gap in between to form a loop to have a space to hang a name tag from.
Stitch the hems you ironed in down.
Stitch the edges, right sides together. Mine aren't neat at all but it doesn't show in the finished item.
I made a gusseted bag by stitching the corners. Pinch a corner across the base of the bag to make it 3D. It's hard to explain, I hope the pictures make sense.
Stitch the corner. I stitched it 4cm in from the corner which makes quite a wide base bag.
ta dah! All done.