Cut Out + Keep

Embellished Square Knot Friendship Bracelet

A Simple But Beautiful and trendy bracelet

https://www.cutoutandkeep.net/projects/embellished-square-knot-friendship-bracelet • Posted by VovsJewellery

You will need

Project Budget
Cheap

Time

1 h 00

Difficulty

Nice & Simple
Medium 16

Description

Instructions

  1. Small 1

    12mm Lobster Clasp 10mm Jump Ring 2 x 6mm Fold Over Cord Ends 2 x 4mm Jump Rings 1 inch Square Metal Pendant 1 mm Cotton Cord: 2 x 15 inches 2 x 35 inches

  2. Small 2

    1: Using one of the 15 inch strands of cotton cord loop it through a corner of the square and pull tight.

  3. Small 3

    2: Taking one of the 35 inch strands, find the middle and place behind the strand already connected.

  4. Small 4

    3: Taking the left strand bring it over the middle strand and over the right strand.

  5. Small 5

    4: Take the right strand and bring it under the middle strand and out over the front on the left hand loop. Pull the knot all the way to the top of the connected strands. This is the first half of a square knot.

  6. Small 6

    5: Now to do the second half of the square knot. take the left hand strand and place under the middle strands and right strand.

  7. Small 7

    6: Now take the right side strand and bring it over the middle strands, behind the left strand and pull the knot up. You now have one full square knot.

  8. Small 8

    7: Continue making square knots for about 3 inches.

  9. Small 9

    8: You now need to do exactly the same on the opposite corner of the square.

  10. Small 10

    9: When you are sure you have the length you want you will be left with four strands on either side like this.

  11. Small 11

    10: Take the fold over cord end and making sure all four strands and inside bend down the sides until secure using a flat nose pliers. You can now trim off the excess cord.

  12. Small 12

    11: Using a 4mm jump ring attach the cord end and the lobster clasp.

  13. Small 13

    12: Finally attach the 10mm jump ring with the other 4mm jump ring to the cord end.