Earring Jackets

Make On Trend Earring Jackets in a Jiffy with a Jig!

Posted by merjoydesigns

About

Share

You Will Need (3 things)

  • Artistic Wire Findings Form 1-5 Connector 228S-668
  • 22 Gauge Artistic Wire
  • Cutter

Steps (7 steps, 30 minutes)

  1. 1

    Insert the 22 Ga wire in the hole of the Findings Form. Bring it up and to the right of the top peg.

  2. 2

    Continue winding the wire around the top peg counterclockwise, then down in between the last two pegs on the right. Wrap the Wire counter-clockwise around the last peg, and bring it in between the third and fourth pegs.
    *Tip: move the Jig around rather than the wire to get tight wraps.

  3. 3

    Continue wrapping the wire around the pegs counter-clockwise. After you wrap the last peg, bring the wire back up to the top peg.

  4. 4

    Wrap the extra wire around the loop as shown.

  5. 5

    Add dangles to the loops.

  6. 6

    Attach the Ear Jacket through a post earring behind your ear for a modern, trendy look!

  7. 7

    Find a Video of this Project here: