https://www.cutoutandkeep.net/projects/diy-wire-wishbone-pattern-earrings • Posted by
With aluminum wire and stone beads you can make cheap personalized jewelry in a quick and easy way! This tutorial is going to show you how to make DIY wire earrings in a wishbone pattern.
With aluminum wire and stone beads you can make cheap personalized jewelry in a quick and easy way! This tutorial is going to show you how to make DIY wire earrings in a wishbone pattern.
Materials and tools: 1.5mm bisque aluminum wire 0.5mm bisque copper wire Cubic millefiori glass Round nose pliers Flat nose pliers Wire cutters
Step 1: Make earring dangles 1st, cut two pieces of aluminum wire that measure about 10cm; 2nd, slightly bend it in half with round nose plier; 3rd, cut a piece of 15cm copper wire and coil it around left side of one beaded aluminum wire ; 4th, coil 5 times, stop to add a cubic bead on and then coil around the right side; 5th, do another 5 times and cut off excess copper wire; 6th, repeat above process to make the other dangle.
Step 2: Attach ear hooks to the dangles 1st, with aluminum wire and pliers make a pair of ear hooks; 2nd, open the loop of the ear hooks and attach dangles to them; 3rd, flatten the ends of earrings.
The final look is like below: Now the DIY wire earrings tutorial is finished! So are you satisfied with the wishbone earrings? With sufficient supplies, you can create more cheap personalized jewelry pieces. Prepare a stack of earrings, and give a go to this summer jewelry binge.