https://www.cutoutandkeep.net/projects/diy-water-feature • Posted by reinspireddecor
To avoid the pump getting clogged with any debris use a plastic container. Puncture it with several holes so the water can drain through. Make one larger hole in the center to accommodate the tube.
Cut a notch at one edge to allow the power cord through for the pump.
Cut the tube to size and attach it to the pump. You want to make the tubing just long enough to stick out above the rocks.
Now it’s time to start filling the container. We chose a galvanized bucket that we found at the dollar store. We had some leftover aquarium gravel so we used that as filler.
Get creative and add some decorations!