Diy Stud Earrings

Metal Stud Earrings!

Posted by Shawntay A.

About

This project is only cheap if you have all the necessary items. But seeing as DIYers, crafters, sewers, etc. are usually hoarders :), this shouldn't be a problem.

Share

You Will Need (4 things)

  • Hot Glue Gun And Glue Sticks
  • Cheap Earrings
  • Metal Studs
  • Whatever kind of Pliers you own.

Steps (6 steps, 10 minutes)

  1. 1

    You will need to have cheap earrings that are you never wear for this project. The ones shown in the picture are the best for this project.

    NOTE: Of course, the size that can be used for the earrings depends on the size of the metal studs you choose to use.

  2. 2

    These metal studs were taken for an old belt that was coming apart. You can also buy these online, just be sure to pay attention to the size of the studs. You don't want earrings that are bigger than your face!

  3. 3

    Now that we got all the information out of the way, let's get started!
    First, fold the prongs on the studs down inside the stud, or you can choose to cut them off with wire cutters.

    NOTE: I do not recommend cutting the prongs off because the raw edge that is left can cut you.

  4. 4

    If you don't want to destroy your fingers, use some pliers to fold down the prong and ensure that it is as flat as possible.

  5. 5

    Next, all you have to do is hot glue the earring into the stud. Repeat the steps for the other earring.

    NOTE: Be sure that the earring sits as level as possible in the stud. If you notice it's lopsided, just go back a step and flatten out the prong some more.

  6. 6

    Now you have some awesome studs earrings. The best part of this DIY, it was free!