Diy Statement Bag
DIY STATEMENT BAG
Posted by David Q.
About
DIY STATEMENT BAG
Share
You Will Need (2 things)
- Novelty Container
- Leather
Steps (12 steps, 120 minutes)
-
1
You will need a novelty container, a piece of leather, ruler, scissors, a pen, screwdriver, screws, a soldering iron or drill and adhesive velcro dots
-
2
Measure a piece of leather 120 by 6 cms
-
3
Now just cut the leather
-
4
Fold in half with long edges together then pin and sew 3 mm from the edge
-
5
Cut the excess of leather
-
6
Mark the place where you will attach the leather on each side of the container
-
7
Using the soldering iron make a hole in the leather and the container on each side. You could also use a drill instead
-
8
Measure and cut a strip of leather 13 by 4 cms
-
9
To keep the bag closed we`ll attach the strip of leather to the back of the container. Create 2 holes on the container and leather as shown.
-
10
Use the screws to fasten the leather strip to the back of the container
-
11
Stick one velcro dot to the leather and one to the bottom front of the container
-
12
This is how it should look like once it is done